Compaq AERO 2100 - Manual (Page 125)

Writer: Beth Snowberger - Saved by: Fleur - Saved date: 08/17/99 1:44 AM
File name: Parrot15_RefGuide_final_0810
I
NSERTING A
C
OMPACT
F
LASH
C
ARD
To insert a CompactFlash card, follow these steps:
Remove the CompactFlash slot cover Ê. Turn over the device. On the
back of the device, there is an indentation that allows you to pull the
cover out of the slot with a thumbnail.
NOTE: The CompactFlash slot cover Ê can and should be replaced only
when the slot is empty.
Removing the CompactFlash slot cover
The front side of a CompactFlash card is usually identified with a
label Ë. Position the card so that the label side of the card is closest to
the screen of the device and insert the pin-hole edge of the card into
the slot. Carefully press the card into the slot until you feel it dock
with the connector inside the slot.
CAUTION: Forcing a CompactFlash card into the CompactFlash slot
can damage the slot.
Inserting a CompactFlash card
К
Л