SCANTECH ID (Champtek company) VEGA V-1030 - Manual (Page 38)

38
OUT OF RANGE
When “Out of Range” function is enabled, and the scanner is working at out of transmission range,
the scanned data will be stored to out-of-range memory. Memory size is approximately 25,000 sets
of EAN13 barcode type. The all stored data will be transmitted to device when the link is
reconnected
, and the all data stored in out-of-range memory will be cleared.
<Out of Range Enable>
Out of Range Disable
The scanner is equipped with sleep mode function to save battery energy when the scanner is
not used for 1 minute or 10 minutes. During sleep mode, all the functions and connection will be
halted until pressing the trigger button. The communication with cradle or Bluetooth device will
be reconnected.
Sleep Mode 1 min. On
Sleep Mode10 min. On
Sleep Mode Off