Wichita Clutch GMC - Grinding Mill Clutch - Manual (Page 9)

Standard Vent Clutches
144 Wichita Clutch 800-964-3262 P-1100-WC 1/12
Wichita Part No. AA B C D E F G H Max. RPM
8-240-701-003-1 5/8-18NF 1/4" NPT .40 1.046 2.250 1.500 2.13 3.297 3,500
8-240-705-001-1 1"-14 NF 1/2" NPT .75 1.250 3.188 2.500 3.00 4.438 3,500
8-240-708-001-1 1"-14 NF 3/4" NPT .75 1.313 4.688 2.875 3.69 5.440 3,500
8-240-710-002-1 1-1/2"-12 NF 1" NPT 1.13 1.937 4.875 3.250 3.44 6.812 2,500
8-240-712-001-1 2"-12 NF 1-1/2" NPT 1.13 2.813 5.250 4.250 5.38 8.062 2,500
8-240-714-001-3 2" NPT 2" NPT 1.50 3.000 7.062 4.625 7.00 10.062 1,000
8-240-716-000-3 2-1/2" NPT 2-1/2" NPT 1.88 3.250 9.375 7.000 7.75 12.625 750
Quick Release Valve
8-263-610-011-1 7/8" – 14 Thread
8-263-610-021-1 1/2" NPT
Quality Material
Body and Cap: High strength aluminum alloy
Stem: Molded nylon
Check Valve: Nylon ball
"O" Ring: Neoprene
Standard thread arrangement of 1/2" size.
1/2" pipe thread on the tube connection
and choice of 1/2" pipe thread, or stan dard
7/8-14NF thread for flared fitting thread on
inlet connection. (Fits standard No. 10
high-pressure hose fitting.)
1/2" NPT (for Optional Muffler 4-263-605-002-0)
The Wichita Roto-coupling is a device to
connect, or couple, a non-rotating air, gas, or
fluid line to a rotating shaft.
Roto-Couplings
The Wichita Springless Quick Release Valve
discharges twice as fast as any other valve
tested in our laboratory and is four to five times
faster than some common makes of valves.
This valve will close and seal with less than 20
lbs. pressure. Most others require 25 to 30 lbs.
to definitely seal. In actual tests, the Wichita
Valve made many hundreds of thousands of
engagements and dis en gage ments before the
slightest leak occurred, or any parts needed
re place ment. Other valves which were tested
required major re place ment in fewer than 20,000
cycles.
• Long life, no maintenance
• Felt seal eliminates bearing con tam i na tion
• Fast, easy installation
Dimensions: inches
Grinding Mill Clutches