Wichita Clutch LI SSB - Low Inertia Spring Set Brake - Manual

Air Tube Disc Clutches and Brakes
58 Wichita Clutch 800-964-3262 P-1100-WC 1/12
Wichita Spring-Set Air Release Brakes are
ideal for fail safe protection of process
equipment. Constructed of high strength cast
iron, this improved design has thick friction
discs for longer wear life. The fast acting air-
tube design assures quick, smooth stops.
• No lubrication
• No adjustment
• Available in vertical mount
• Quick, simple installation
• Explosion proof design
Selection requirements
The selection of a Low Inertia Brake is
based on:
1. Torque required to stop a load
2. Friction area necessary to absorb
rotational energy
3. Contact velocity of rotating discs
4. Maximum bore capacity of unit
Shims
Multiple
Spud Airtube
Airtube Holding
Plate
Hub
Ductile Center
Plate
Grooved Friction
Disc
Demountable
Backplate
(Optional)
Spring-Set Air Release Brakes
Very Low
Inertia Drive
Plate Assembly
Bonded or Riveted
Ring