LaMotte Tracer Total Chlorine Meter - Manual (Page 14)

TROUBLESHOOTING
Problem
Check Action
Power on but no
display Batteries Insert batteries
Verify correct polarity
Replace
Unstable reading Electrode Immerse probe more deeply in sample
Remove air bubbles caught under
electrode
Clean electrode
Replace electrode
Slow response Electrode Clean electrode
Unexpected low
results Tablet Confirm tablet has been added
Unexpected high
results Tablet Dissolve tablet completely
Display frozen HOLD
function Press MODE/HOLD or turn meter
off. Restart.
Button
press Remove batteries (stored data will be
lost)
EXPANDING YOUR TRACER
Interchangeable electrodes are available to convert the Total Chlorine
TRACER to a pH TRACER or an ORP TRACER.
Remember to ask for instructions and appropriate reagent or buffer
tablets when ordering pH or ORP electrodes.
pH TRACER Electrode, 0.00-14.00 pH Code 1733
The pH TRACER Electrode is used with pH 4.0, 7.0
and 10.0 buffers. Order using the following codes:
pH 4.0 Mini Buffer Tablets (100)
Code 3983A-J
pH 7.0 Mini Buffer Tablets (100)
Code 3984A-J
pH 10.0 Mini Buffer Tablets (100)
Code 3985A-J
14