LaMotte SMARTLink3 - Manual (Page 6)

DOWNLOADING TEST DATA 
Connect the meter to the PC. 1.
Put the meter into the “Run PC Link” mode. 2.
Click on the “Import Meter Log” button on the left hand side of the 3.
“SMARTLink 3” window. This will launch the “Import Meter Log”
window.
Select the meter profile from the drop down list.
4.
Set the “Site Name” drop down list to the site for which the records will 5.
be imported.
Click the “Get Log” button below the “Data Preview” box.
6.
Wait while the program retrieves the meter data. 7.
Click the “Save Data” button in the lower right hand corner of the 8.
window.
Records are imported based on the time stamp. If a group of records are
downloaded, and the data logger is not emptied, the next time records are
downloaded, only the records that are not already in the database will be
imported.
EXPORTING DATA 
Click the “Export Test History” button on the left hand side of the 1.
“SMARTLink 3” window. This will launch the “Export Test History”
window.
Select the tests to be exported. Data can be filtered by test site, and/or
2.
by date range.
6