LaMotte CONDUCTIVITY/TDS METER DA-DS 1939 User Manual
Conductivity/tds meter
Advertising
CONDUCTIVITY/TDS METER
OPERATOR’S MANUAL
MODEL DA-DS · CODE 1939
SPECIFICATIONS
METER
A. Range:
0 - 5,000 micromhos/cm
0 - 3,500 Total Dissolved Solids
B. Accuracy:
2% full scale reading
C. Precision:
0.5% full scale reading
FUNCTION CONTROLS
A. Operation Switch:
BATCK - check battery reserve
OFF - turn meter off
CAL - calibrate instrument
ON - read conductivity or Total Dissolved Solids (TDS)
B. Calibration:
Calibrates instrument by regulating voltage potential
C. Temperature Compensation:
0-100
o
C - adjusts instrument to temperature of sample
being tested
D. Other Specifications:
Power: Single 9V Transistor Battery
Physical Dimensions: 3-3/4" width x 2-5/8" depth x 6-1/4"
height
Weight: 1.4 lbs
Jack Receptacle: accepts 9V AC Adapter, 3.5mm plug
Code 1708 (optional)
Advertising