LaMotte SULFIDE IN WATER TEST KIT SL-P70 - Manual (Page 2)

PRO CE DURE
NOTE:
The sample must be collected with a minimum of aeration and
should be analyzed promptly.
1.
Fill a test tube (0106) to the 5 mL line with the sample.
2. Add 15 drops of *Sulfide Reagent A (4458). Cap and mix.
CAUTION:
*Sulfide Reagent A is a strong acid solution and must
be handled with great care.
3. Add 3 drops of *Sulfide Reagent B (4459). Cap and mix. Wait for 1
minute.
4. Use the 1.0 mL pipet (0354) to add 1.0 mL of Sulfide Reagent C
(4460). Cap and mix. A blue color indicates Sulfide.
5. Insert the test tube into the top of the Octa-Slide Viewer (1100).
Slide the Sulfide Octa-Slide Bar (3414) into the Viewer. Match
sample color to a color standard. Record result as ppm Sulfide.
LaMOTTE COM PANY
Helping Peo ple Solve An a lyt i cal Challenges SM
PO Box 329 • Chestertown • Mary land • 21620 • USA
800-344-3100 • 410-778-3100 (Out side U.S.A.) • Fax 410-778-6394
Visit us on the web at www.lamotte.com
12/10