LaMotte TDS KIT 4801-DR-01 - Manual

TOTAL DISSOLVED SOLIDS (TDS) KIT
DIRECT READING TITRATOR, 0-1000 ppm
CODE 4801-DR-01
QUANTITY CONTENTS CODE
60 mL *TDS Reagent A *4802DR-H
60 mL *TDS Reagent B *4803DR-H
15 mL *Methyl Orange Indicator, 0.1% w/Halidex *2299-E
2 Direct Reading Titrators, 0-1000 Range 0384
2 Test Tubes, 5-10-15 mL, glass, w/caps 0778
1 Pipet, 1.0 mL, plastic 0354
60 mL Demineralizer Bottle 1151
2 Resin Columns 1079
*WARNING: Reagents marked with an * are considered to be potential health hazards.
To view or print a Material Safety Data Sheet (MSDS) for these reagents go to
www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail, phone or fax.
To order individual reagents or test kit components, use the specifi ed code number.
Read the LaMotte Direct Reading Titrator Manual before proceeding. The Titrator
is calibrated in terms of Total Dissolved Solids (TDS) expressed as parts per million
calcium carbonate (CaCO3). Each minor division on the Titrator scale equals 20 ppm.
Two identical Direct Reading Titrators are furnished in this kit. Use one Titrator to
dispense TDS Reagent A; use the second to dispense TDS Reagent B. Do not interchange
the Titrators.
The Demineralizer Bottle is the source of all the demineralized water used in this test.
Read the instruction sheet before proceeding.
CARE OF THE RESIN COLUMN
At the conclusion of each test, treat the resin column with demineralized water as
described in Step 6. Stopper and cap the moist column between uses.