LaMotte LEAD IN AIR TEST KIT User Manual

L mott, Lead in air test kit

Advertising
background image

LEAD IN AIR TEST KIT

CODE 7440

QUANTITY

CONTENTS

CODE

2 x 120 mL

*Lead in Air Absorbing Solution

*7668-J

120 mL

*Lead Dithizone Reagent

*4427-J

30 mL

*Lead Reagent #2

*7665-G

30 mL

*Sodium Hydroxide, 5N

*6533-G

30 mL

*Hydrochloric Acid, 1N

*6130-G

1

pH Indicator Sticks, 7.5 - 14.0

3-2957

1

Pipet, 1.6 mL, glass, w/bulb

0305

2

Test Tubes, 10 mL, glass, w/caps

0843

1

Lead In Air Comparator

4418

*WARNING:

Reagents marked with an * are considered to be potential health

hazards. To view or print a Material Safety Data Sheet (MSDS) for these
reagents go to www.lamotte.com. To obtain a printed copy, contact LaMotte by
e-mail, phone or fax.
To order individual reagents or test kit components, use the specified code
number.

NOTE:

Student use of the chemicals in this kit should be closely

supervised by a responsible adult. *Lead Reagent #2 (7665) contains toxic
sodium cyanide

and should never be mixed with any acid - a reaction

which can liberate poisonous hydrogen cyanide gas! *Lead Dithizone
Reagent (4427) contains chloroform. Vapor can cause nausea and
unconsciousness if purposely inhaled. Skin contact with either reagent
should be followed immediately by a thorough washing with soap and
water. Waste water samples from the lead test should be collected in a
labeled glass or plastic bottle and held for disposal by an approved
hazardous waste disposal company.

L Mott

WARNING! This set contains chemicals

that may be harmful if misused. Read

cautions on individual containers

carefully. Not to be used by children

except under adult supervision

Advertising