Cobra Electronics ESD9860 - Manual (Page 10)

When you set display brightness while in
Voice Alert™ mode, you will hear the
corresponding voice message, “bright,”
“dim,” “dimmer,” or “dark.” In Tone
mode, you will hear 2 beeps for bright,
1 beep for dim, dimmer, and dark. (See
page 7 for instructions on using the
Program Mode to set Display Brightness.)
NOTE: You can set display brightness
without entering Program Mode by
repeatedly pressing and releasing the
SELECT/DIM button.
The factory setting is Bright.
3
O P E R AT I O N • S E T T I N G S
3
O P E R AT I O N • S E T T I N G S
15 14
VG-2 Alert ®
The ESD-9860 is undetectable by police
VG-2 detection devices, and will alert you
when such a device is in use near your
vehicle. During the alert, the unit continues
to detect other signals. You can choose
whether or not you want your unit to show
VG-2 alerts. With VG-2 detection on, you
can also choose whether or not you want
your unit to sound audible VG-2 alerts.
When you turn VG-2 detection on or off
while in Voice Alert™ mode, you will hear
“VG-2 on” or “VG-2 off.” In Tone mode,
you will hear 2 beeps for VG-2 on or
1 beep for VG-2 off.
When you turn VG-2 audio on or off
while in Voice Alert™ mode, you will hear
“VG-2 audio on” or “VG-2 audio off.” In
Tone mode, you will hear 2 beeps for VG-2
audio on or 1 beep for VG-2 audio off. (See
page 7 for instructions on using the Program
Mode to turn VG-2 alerts on and off.)
The factory settings are VG-2 Detect On,
VG-2 Audio On.
DigiView ™ Data
Display Brightness
You can choose from four settings for
brightness of the display:
Bright for daytime driving
Dim for dusk driving
Dimmer for night driving
Dark (no visual alerts will be displayed)
You can cycle through the 4 settings by
repeatedly pressing and releasing the
SELECT/DIM button.
DI
M
/M
OD
E B
UTT
ON
PR
ES
S&
RE LEA
SE DIM/M
ODE
BU
TTO
N
PRESS
& R
ELE
AS
E
DIM
/M
OD
E BU
TTON
PR
ESS
&
RELE
ASE
DIM
/M
OD
E B
UT
TO
N
PRE
SS
&
RE
LE
AS
E
Dark
Bright
Dim
Dimmer
h
SELECT/DIM button
Press and release
Dark indicator