Crimestopper Security Products CS-2002DPII - Manual (Page 10)

10
OPTION PROGRAMMING
1. Turn the Ignition ON and press the Override/Program button 5 times. After a slight delay, the system will chirp and
flash the lights 5 times.
2. Within the next few seconds, press the Override/Program button [again] the number of times that corresponds to
the options chart below. The siren and horn will chirp for each button press. DO NOT LOSE COUNT!!
3. When you get to the desired option number, quickly press the appropriate button on the remote control according to
the chart below. Button 1 gives a single light flash / chirp, Button 2 gives two light flashes / chirps, and Button 3
gives three light flashes / chirps.
4. Turn Ignition off. The system chirps and flashes the lights 3 times on exit. When you are finished customizing
options, check operation.
PROGRAMMING OPTIONS CHART * = Default Setting
Option # Option Description
BUTTON 1
LOCK
BUTTON 2
UNLOCK
BUTTON 3
TRUNK
1. Factory Horn Chirps / Pulses
Pulse with
trip only
Arm/Disarm
Chirps
& Pulse with trip
*Arm/Disarm/Warn Chirp
& Pulse with trip *
2.
Passive Arming /
Passive Chirp Countdown
ON *OFF*
Passive Arm with
Chirp Countdown
3. Passive Lock / Custom Override ON *OFF* Custom Override
4. Ignition controlled Locks *ON* OFF Ignition Lock Only
5. 5/60 Sec. Door Open Warning 5 Seconds *60 Seconds*
6. Active Re-Arm (30 Sec.) *ON* OFF
7. Double Unlock Pulse OFF* ON
8.
Silent Arm/Disarm
(Chirp Defeat w/button 1 or 2)
*OFF* ON
9. Parking Lights on with disarm *ON* OFF
10. Disarm with trunk pop OFF *ON*
11. N/A N/A N/A
12. Door Lock Pulse Time *0.7 Sec.* 3 Sec.
13. Type of Carjack Protection *Active * Active & Passive Full-Time
14. Carjack Enable/Disable *Disabled * Enable
15. L/UL or Arm/Disarm w/IGN ON *Lock/Unlock* Arm/Disarm
16.
Dataport Protocol 1-Way = OFA,
2-Way = SL
*2-Way* 1-Way