Replacement parts – Canon IMAGEFORMULA DR-2010M User Manual
Page 35
31
Power Supply (using AC adapter)
DC 16 V, 1.0 A
Power Consumption
Scanning: Maximum 16 W
In the Sleep mode: Maximum 1.8 W (AC 220-240 V:
1.9 W)
With power switch OFF: Maximum 0.5 W
Noise
Not more than 66 dB
Operating Environment
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH
AC Adapter (100 to 240 V type)
Model Number MG1-4315
Input
AC 100 to 240 V, 50/60 Hz, 65 VA to 82 VA
Output
DC 16 V, 1.8 A
Weight
Approximately 0.3 kg (including power cord)
Replacement Parts
Exchange roller kit (product code: 2445B001)
This kit includes replacement feed and retard roller assemblies, and a
replacement document pressure guide.
• For details on replacing the parts, see “Replacing Consumables” on
• Contact your local authorized Canon dealer or service
representative for detailed information about the replacement parts.
Product specifications are subject to change without notice.
FCC REGULATIONS (For 120 V model)
Document Scanner, Model M11074/M11073
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment OFF and ON, the user
is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success NY 11042, U.S.A.
Tel. No. (516)328-5000
RADIO INTERFERENCE REGULATIONS (For 120 V models)
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the
Interference-causing equipment standard entitled "Digital
Apparatus", ICES-003 of the Industry Canada.
RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For
120 V models)
Cet appareil numérique respecte les limites de bruits
radioélectriques applicables aux appareils numériques de Classe B
prescrites dans la norme sur le matériel brouilleur: "Appareils
Numériques", NMB-003 édictée par l’Industrie Canada.
MODEL NAMES
Model DR-2010M is identical to model M11074.
Model DR-2010M is the sales name of model M11074.
Model DR-2510M is identical to model M11073.
Model DR-2510M is the sales name of model M11073.