Casio WK210ES1A - Manual (Page 55)

English
Recording Your Keyboard Play
E-53
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.
1.
Press bq .
2.
Press 5 .
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use
bs (10-key) to
specify the number of the song you want to record or play
back. The song number will disappear if you do not
perform any operation.
Example: Song 2
3.
Press 5 to record, or bm to play back.
To stop recording or playback, press bm .
4.
Press 5 twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, hold down 5 (without
pressing any keyboard key) until the message “Song Del?”
appears on the display. Press [+] (YES) to delete the song, or
[–] (NO) to cancel the delete operation.
This section explains how to play along and record along with
one of the Digital Keyboard’s built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
1.
Press br .
2.
Press 5 .
This will enter playback standby.
3.
Press 5 again.
This will enter record standby.
4.
Use bs (10-key) to enter the song number you
want to assign to the recording.
Recording Two or More Songs,
and Selecting One for Playback
P l a y N o .
Recording while Playing Along
with a Built-in Song
Lights
Flashes
Flashes