Locking and unlocking the mrp menu, Saving the quartet’s current settings – ClearOne NetStreams Quartet User Manual
Page 52
Using the Setup Menus
4-31
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Locking and Unlocking the MRP Menu
The MENU LOCK setting locks the menus on the Quartet MRP display. You use a
password (set under SYSTEM->PASSWORD) to unlock the display.
To lock the display, follow these steps:
1.
Press the down arrow key to highlight MENU LOCK.
2.
Press the MENU key to select MENU LOCK.
3.
Press the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-40
Locking or unlocking the menu
4.
Use the up or down arrow key to lock the menu.
5.
When you are done locking or unlocking the menu, press the MENU key again.
From the MENU LOCK menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
FACTORY - to return to the factory default.
SET ALL - inactive.
Saving the Quartet’s Current Settings
The SETTING menu is used to save Quartet’s current settings to internal memory.
This is useful if during installation settings are changed in different configurations. The
saved settings can be recalled from memory to quickly restore the system.
To save or load system settings to or from memory, follow these steps:
1.
Press the down arrow key to highlight SETTING.
2.
Press the MENU key to select SETTING.
3.
Press the down arrow key to highlight LOAD or SAVE and press the MENU key.
The following screen appears: