ClearOne Titan Media Cart - Manual (Page 9)

Assembly 7
t
itAn
d
uAl
m
ediA
c
Art
ASSEMBLING THE HARDWARE
1. Align the Vertical Support over the self-clinching nuts in the Universal
Base.
» NOTE: The self-clinching nuts are attached to the top of the
Universal Base.
2. Secure Vertical Support using six 5/16 Bolts.
3. Line up the Horizontal Support alignment pins with the guiding holes
on the Vertical Support at desired height and slide into place.
4. Hold the Horizontal Support in place while securing it to the Vertical
Support using six 5/16 Bolts.
» NOTE: The Horizontal Support can be raised or lowered on the
Vertical Support to achieve the desired viewing position of the
screens.
Bolts
Vertical Support
Support Top
Universal Base
Horizontal Support
Bolts
Alignment
Pin