ClearOne Converge Pro Serial - Manual (Page 56)

283
SPEEDDIAL – Speed Dial a Number
This command dials a speed dial number.
Command Form : DEVICE SPEEDDIAL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 17 (R) -
Value Unsigned Integer 2 1 – 20
(Null to query in text)
-
STRING – String Execution
This command sends the specified string out the serial port.
Command Form : DEVICE STRING [ID]
Argument Type Size Values Units
ID Unsigned Integer 4 0 – 7
(Null to query last string in text)
-
SYSCHECKS – System Checks
Initiates the system checks. There is no query for this command.
The System Check integer bits determine which tests are run. Each bit set generates a separate SYSRESULT
response.
COMMAND FORM : DEVICE SYSCHECKS <System Check>
Argument Type Size Values
System
Check Hexadecimal
Integer 4 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Network
Telephone
Mic 1
Mic 2
Mic 3
Mic 4
Mic 5
Mic 6
Mic 7
Mic 8
All other bits reserved
Packet Loss Statistics
SIP Proxy Registration Status
Power Amp Fault Check
Power Amp Temp Check