ClearOne Dante Controller - Manual (Page 59)

Dante Controller User Guide
Copyright © 2014 Audinate Pty Ltd. All rights reserved. -59-
If any bars are red, it indicates lost packets, and audio loss. The receiver latency should be increased, or
the network reconfigured.
Note: Dante Controller can be left running for a few days to collect latency data, providing a long-
term picture of the latency performance of your network configuration. This is especially useful after
any network infrastructure upgrades, or after the addition of more end point load in a given network, to
determine if QoS tuning or increased capacity may be required at the network switch level.
Show me