ClearOne XAP 800 - Manual (Page 52)

System Configuration ~ Inputs and Outputs 46
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Outputs 1–12
The XAP 800 has 12 line level outputs for sending audio to video codecs, recorders,
or amplifiers. To open the Outputs 1–12 configuration window, click the Outputs
1–12 button on the Flow Screen. The Outputs 1–12 button on the Matrix Screen will
also open this window.
These line level outputs are balanced. The nominal output level is 0dBu. The
outputs can adjust from -65 to 20dBu.
To select an output channel, click a blank area in the output pane. If you click
on the output label, a secondary window will open allowing you to rename the
output. The background color for the selected output channel will be light gray. The
configurable properties of these outputs are defined in this section.
Mute
Mute mutes the output channel. The light on the button illuminates red when Mute is
activated. Default is off (unmuted).
NOM
NOM (constant gain) maintains a constant output level as inputs routed to the
output are gated on and off. The XAP 800 reduces the output gain (at the output)
for mics based on the number of mics gated on and routed to that output. When
using NOM over the expansion bus, only the first four audio channels (O, P, Q, and R)
Figure 3.48. Outputs 1-12 configuration window