ClearOne NS-MU5066 - Manual (Page 8)

COMMAND PARAMETERS AND RANGES
All specifications subject to change without notification. All rights reserved. Copyright © 2005 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 / www.netstreams.com
NS-0505-7127 8
The following parameter types are used in the command table below. Parameters
are entered and returned as ASCII strings.
Parameter Description
Z Zone number. Range is 0-6. The 0 parameter is for all zones.
S Source. 0 = Off. 1 to 4 = source, E=Ext, F=Tuner
V Volume 0 - 35
X Logic Level Parameter. Values are 0=Off, and 1=On. (Loudness
use the X parameter in 2.0)
D Direction to ramp. 0=down, 1=up
P Page Group to enable/disable.
C Registered Source Command
F Balance 1- 15
R Source Names 1-41 (see list page 10)
L Brightness Level 1-15
A Internal Amp = 0, Int+Ext=1, Ext Variable=2, Ext Fixed=3
E Enable =1/ Disable =0