Chapter 4: maxattach wireless – ClearOne MAX Wireless/MAXAttach Wireless User Manual

Page 18

Advertising
background image

14 Technical Services: 800-283-5936

CHAPTER 4: MAXATTACH WIRELESS

USING THE MAXATTACH WIRELESS CONFERENCING SYSTEM

MAXAttach™ Wireless is a dual-pod conferencing system. The MAXAttach™ Wireless pods function only with their
associated base unit. The base unit and conferencing pods are programmed at the factory, and they have matching
serial numbers. The serial number is located on the back of the base unit, and on the bottom of each pod.

There are a few minor differences between single-pod and dual-pod operation as detailed in the following sections.

Answering a Call

• Both pods ring during an incoming call. Each pod’s ringer melody and volume depend on that pod’s

programmed ringer settings. Pressing ON/OFF on either pod activates both pods.

During a Call

Changing the speaker volume and muting or un-muting the microphone causes both pods to change
simultaneously.
If one pod loses its link to the base unit due to low battery power or being moved out of range, the call will
continue on the other pod.

Ending a Call

Pressing ON/OFF on either pod ends the call and places both pods into standby mode to wait for the next
call.

Advertising