Uring, Inging, Djust – ClearOne MAX IP Conferencing Phone User Manual

Page 6: Inger, Olume, Oudspeaker, Ccess, Tore, Umber, Honebook

Advertising
background image

MAX IP User’s Guide 3

To Mute during ringing

Press the star (

*) or the MUTE key to mute the ringer for the duration of the ringing.

> Note: This only mutes the current ring; the ringer is unmuted for subsequent calls.

To Adjust ringer Volume

While the phone is ringing, press

1.

VOLUME UP or VOLUME dOWN.

While the phone is inactive, press

2.

VOLUME UP or VOLUME dOWN. The ringer melody plays once at the new

level.

To Adjust Loudspeaker Volume

Press the

1.

VOLUME UP key while on a call to increase volume.

Press the

2.

VOLUME dOWN key while on a call to decrease volume.

To Access Your Help Line

While in

Standby mode, press and hold the 0 key for 2 seconds. This feature must be programmed before use.

To store a Number in the Phonebook

enter the number while the phone is in

1.

Standby (Inactive) mode.

Press and hold the

2.

PHONEBOOK key until the Phonebook and Program icons appear.

Assign a Phonebook location (0–9) by pressing the corresponding number key.

3.

Press the

4.

PHONEBOOK key again to save the entry. You hear a confirmation tone.

To exit

5.

Phonebook Edit mode before saving the entry, press the CLEAr key.

To Make a Call Using the Phonebook

Press the

1.

PHONEBOOK key.

Press the specific number (

2.

0-9) that corresponds with the stored phone number you want to dial. The number is

displayed on the LCd screen.
Press the

3.

ON/OFF key to dial the number.

To Make an Outbound THree-WAY Call

Press the

1.

CONFErENCE key. The first party is put on hold and you are connected to a second line dial tone. Or

press the HOLd key to place the current call on hold, then press ON/OFF key to obtain the second line.
dial the second party’s phone number.

2.

>Note: stored numbers are not available for dialing a second party.

If you receive a busy signal or are routed to voicemail, then press the ON/OFF key to terminate the call and
return to the first party.
Press the

3.

CONFErENCE key to join all three parties in a conference call.

Figure 5 - MAX IP Phonebook and Program Icons

Phonebook and Program icons

Advertising