Carver CV Series User Manual
Page 5
Rev 04.08.021
- 5 –
SPECIFICATIONS with Basic input module
PERFORMANCE:
•••• THD:
<0.5% @ rated power, 0.2% 1/8 rated power at1 kHz
•••• IMD DIM30 Method:
<0.2%
•••• Dynamic Headroom: 1.5dB
•••• Power Bandwidth:
40 Hz to 20 kHz, 4 and 8 ohm loads
•••• Frequency Response:
30 Hz to 20 kHz +0.5, -3dB(4 and 8 ohm loads)
•••• Signal-to-Noise:
94dB (typical), A-weighted, referred to rated power
•••• CMRR:
75dB at 1kHz
•••• Slew Rate: 7V/µSec
•••• Sensitivity for rated power (includes EFX Inputs):
0dBu or 0.775 V
rms
•••• Input Impedance (includes EFX Inputs):
50k
Ω balanced
•••• Input Overload (includes EFX Inputs):
20 dBu
•••• Protection:
Thermal, Short Circuit, Over-current & Over Voltage, self-resetting
•••• Stability:
Unconditionally stable into reactive loads
•••• Duty Cycle:
Continuous operation with dynamic signal at 1/3rd power
POWER
REQUIREMENTS:
•••• Mains Voltage (output power rated at nominal voltage):
100VAC, 50-60Hz ±20%
120VAC, 60Hz ±20%
230VAC, 50Hz ±20%
• Power Consumption
(See Appendix A)
REGULATORY COMPLIANCE:
•••• Proposed ETL/C Mark to:
UL6500, 2
nd
Edition
•••• CE Certification to:
EN55103-1 & EN55103-2
PHYSICAL:
•••• Cooling Method:
Convection
•••• Operating Environment:
-10
o
C to 55
o
C, up to 85% RH
•••• Storage Environment:
-45
o
C to 70
o
C, up to 93% RH
•••• Dimensions:
3.5” H (2U) x 19.0” W x 16” D
89mm x 483mm x 438mm
•••• Net Weight:
CV1501 – 27.4lbs / 12.4kg
CV2501
–
32.7lbs / 14.9kg
•••• Shipping Weight:
CV1501 – 32.9lbs. / 15.0kg
CV2501
–
38.2lbs. / 17.4kg