Dymo LabelManager PnP - Manual (Page 6)

2
Become familiar with the features shown in Figure 2.
Inserting the Battery
The label maker is powered using a rechargeable lithium-ion battery.
To insert the battery
1 Open the side cover of the label maker.
2 Remove the battery compartment cover.
See Figure 3.
3 Insert the battery into the battery
compartment as shown.
4 Replace the battery compartment cover.
5 Close the side cover of the label maker.
NOTE Remove the battery if the label maker will
not be used for a long period of time.
1 Power button/Status light 4 USB port 7 Battery compartment
2 Cutter button 5 Side cover 8 Label compartment
3 Label exit slot 6 Cleaning tool 9 Serial Number label
Figure 2
7
3
4
2
6
9
8
5
1
Figure 3