Dymo LabelManager 220P - Manual (Page 19)

19
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free service, while
requiring very little maintenance. Clean your label maker from time to time to keep
it working properly. Clean the cutter blade each time you replace the tape cassette.
To clean the cutter blade
Remove the tape cassette. 1.
Press and hold down the cutter lever to 2.
expose the cutter blade. See Figure 6.
Use a cotton ball and alcohol to clean both 3.
sides of the blade.
è The cutter blade is extremely sharp. Use
caution when cleaning.
To clean the print head
Remove the tape cassette. 1.
Remove the cleaning tool from inside the tape compartment cover. 2.
Gently wipe the padded side of the tool across the print head. See Figure 6. 3.
Figure 6
Print head Cutter button
LM220P-UK_WEU.indd 19 25-07-2007 14:45:18