Dymo LabelManager 350 - Manual (Page 10)

Using Labelmaker Memory
The labelmaker has a powerful memory feature
that stores text and formatting as follows:
• Automatically stores the last 10 labels printed.
• Allows you to store the text of up to 10 labels
you use frequently.
• Allows you to name and store up to 10
commonly used label formats.
Storing Label Text
The labelmaker automatically keeps the last 10
labels printed in a text buffer. In addition, you
can store up to 10 specific labels you use
frequently.
To store the current label text
1. Press Memory.
2. Use the arrow keys to select SAVE and then
LABEL.
10 Fields, which represent memory locations,
are displayed. Fields that are filled indicate
stored label text. You can store new text in
any of the memory locations, however, if
you select a location that is filled, the
previous label text will be overwritten.
3. Use the arrow keys to select a memory
location and press OK.
Your label text is saved and you are returned to
the label.
Storing Formats
In addition to label text, you can store up to 10
specific label formats you use frequently. This
feature stores only the formatting information
not the label text.
To store the current format
1. Press Memory.
2. Use the arrow keys to select SAVE and then
FORMAT.
A list of 10 fields, which represent memory
locations, are displayed. Fields that contain
formats display a name in the field. You can
store new formats in any of the fields, how-
ever, if you select a location that is filled,
the previous label format will be overwritten.
3. Use the arrow keys to select a field and
press OK. The word NAME? appears in the
field.
4. Enter a name for the format and press OK.
Your label format is saved and you are
returned to the label.
Recalling Stored Labels and Formats
You can easily recall labels and formats stored
in memory to use at a later time.
To recall labels or formats
1. Press Memory.
2. Use the arrow keys to select RECALL and
then LABEL, FORMAT, or LAST PRINTED.
A list of memory locations is displayed
similar to storing a label or format.
3. Use the arrow keys to select a label or
format to recall and press OK.
Caring for Your Labelmaker
Your labelmaker is designed to give you long
and trouble-free service, while requiring very
little maintenance.
Cleaning the Labelmaker
Clean your labelmaker from time to time to
keep it working properly. Clean the cutter blade
each time you replace the tape cassette.
To clean the cutter blade
1. Turn the power to the labelmaker off.
2. Press ON/OFF and the Cut key together. The
message CUT TEST appears on the display.
3. Press and hold the Shift+Cut keys.
The cutter blade will move into view in small
steps.
4. When you are able to access both sides of
the blade, release the Shift+Cut keys.
5. Use a cotton bud and alcohol to clean both
sides of the cutter blade.
10
LM350 WEU.qxd 12-11-2003 09:02 Pagina 10