Racking configuration – Allavino Cascina CWR-41-2SD Dual Zone Wine Cooler - 44 Bottle Capacity User Manual

Page 7

Advertising
background image

Racking Configuration

Disperse your bottles evenly throughout the unit so as not to concentrate weight in any one area. This also helps to

provide an even temperature range throughout the unit. Make sure that bottles are not all grouped together either at

the top or bottom of the cabinet. Never try to pull out more than one shelf at a time as it can cause the appliance to tip

forward.

The Allavino Wine Cellar has sturdy hardwood shelves

that can be extended or taken out for easy loading or

unloading. It has 3 shelves that will hold up to 7 standard

750ml wine bottles each. The top shelf can hold up to 12

standard size bottles or be used for oversized bottle

storage. The bottom shelf can also be used for oversize

bottle storage or to store up to 11 standard size bottles,

affording you easy access to up to 44 of your favorite

bottles. The overall bottle capacity will vary depending

upon the size of your bottles. Large diameter bottles will

reduce the capacity.

This wine cellar features hardwood shelves that extend

to make loading and unloading bottles quick and easy.

When the shelf is extended, stoppers on the cellar’s

cabinet will prevent the shelf from coming any further

forward. To remove an empty shelf from the cellar, line

the notches in the shelf with the stoppers, tip the front

of the shelf down slightly to lift it up over the stopper,

and pull the shelf all the way out. Do not use this

method to fully remove a loaded shelf from the unit, as it

may cause the bottles to fall off the shelf and break.

www.allavino.com

7

1-800-710-9939

Advertising