Classe Audio SSP-30 MKII - Manual (Page 23)

5.4 DISPLAY SETUP:
These setting are mainly “set and forget”, with the possible exception of OSD output. We have shipped your SSP-30
MKII with the “TV System” set to the correct format. If you are, however, having trouble with the picture it may be that
the wrong format is set. It is easy to correct; there are only two formats, NTSC and PAL. Using the display on the front
panel of the SSP-30 MKII, navigate to the Display setup screen and change the format to PAL or NTSC, whichever is
correct for your TV and DVD player. All video sources and devices used together should have the same format.
Display setup
TV system
NTSC
Superimpose On
Temporary disp. Full
Video format
Auto
OSD output Both
Distance unit Meters
OSD style
1
Exit
These displays show that you have accessed the Display setup sub-menu and
highlighted TV System. You can scan through the available choices by pressing
repeatedly the \/ and /\ buttons on the remote. When the selection you wish to
adjust is highlighted press the < or > key to scroll through the choices. To memorize
and Exit highlight Exit and press the ENTER key.
Display setup
TV system: NTSC
Panel display
TV Display
5.4.1 TV System: Use < or > to switch between NTSC and PAL.
5.4.2 Superimpose: Use < or > to change. “On” superimposes only words over the TV picture, while “Off” allows
the OSD to completely replace the TV picture.
5.4.3 Temp. Display controls how long any On Screen Display remains present. Use < or > to change. It is
possible to set the parameter to “Full”, (on all the time), “Simple”, (which keeps it on for a few seconds or
“Off”, which prevents OSD entirely.
5.4.4 Video Format can be set to S-Video output or Composite, or Auto. Auto automatically selects the best source
present. Use < or > to change.
5.4.5 OSD Output Use < or > to change. OSD can be applied to the Composite, or S-Video Monitor outputs, or
both, or it may be switched Off. OSD can not be turned on for the “No OSD” outputs.
5.4.6 OSD style changes the screen and text color if Superimpose is switched Off.
5.4.7 Distance unit is setup in feet or meters for use in the Delay Setup menu.
5.4.8 Exit returns to the Main Menu, press ENTER when Exit is highlighted.
23