Casio WK7500E1A - Manual (Page 150)

E-148
Reference
Error Messages
Display
Message
Cause Required Action
Format 1. The current memory card format is not compatible
with this Digital Keyboard.
1. Format the memory card on the Digital Keyboard
(page E-137).
2. The memory card capacity is greater than 32GB. 2. Use a memory card with a capacity of 32GB or
less.
3. You are trying to use an SDXC card. 3. SDXC cards not supported. Use an SD or SDHC
memory card.
4. There is something wrong with the memory card. 4. Use a different memory card.
Card Full There is not enough room available on the memory
card. Delete some of the files on the memory card to make
room for new data (page E-141), or use a different
card.
Card R/W Memory card data is corrupted. Use a different memory card.
No Card 1. The memory card is not loaded correctly in the
Digital Keyboard’s card slot.
1. Correctly load the memory card into the card slot.
2. The memory card was removed while some
operation was in progress.
2. Do not remove the memory card while any
operation is in progress.
No Data You tried to save a Digital Keyboard user area (user
rhythm, user rhythm song, etc.) that does not contain
any data to the memory card. Select a user area that contains data.
No File 1. There is no MUSICDAT folder (page E-140) on the
memory card.
1. Create a MUSICDAT folder on the memory card or
format the memory card on the Digital Keyboard
(page E-137).
2. There is no loadable or playable data in the
MUSICDAT folder.
2. Move the file you want to load or play into the
memory card’s MUSICDAT folder.
Not SMF0/1 You are attempting to play back SMF Format 2 file. This Digital Keyboard supports playback of SMF
Format 0 or Format 1 only.
Protect The memory card is write-protected. Use the memory card’s write protect switch to enable
writing.
Read Only A read-only file with the same name you are trying to
use is already stored on the memory card. • Use a different name to save the new file.
• Remove the read-only attribute from the existing
file and overwrite it with the new file.
• Use a different memory card.
Size Over 1. The data on the memory card is too big to play. 1. This Digital Keyboard supports playback of song
data files with a maximum size of about 320KB.
2. The data you are trying to load is too large. 2. The following is the approximate maximum data
sizes (per data item) when loading data into Digital
Keyboard memory.
User rhythm: 32KB
Song sequencer song: 320KB
User preset: 8KB
A total of approximately 128KB of user presets
(total of all 100 user presets) can be loaded.
Wrong Data 1. The memory card data is corrupted. Use a different memory card.
2. The memory card contains data that is not
supported by this Digital Keyboard.
Meas. Limit You tried to perform an operation during song
sequencer song editing or user music preset editing
that would cause the number of measures in the song
or chord progression to exceed 999. Make sure your edits do not cause the number of
measures to exceed the 999-measure limit.
CTK7000_e.book 148 ページ ２０１０年７月２１日 水曜日 午後５時１５分