Cadillac 2008 CTS - Manual (Page 147)

Flash-to-Pass
This feature allows you to use the high-beam headlamps
to signal the driver in front of you that you want to pass.
Pull and hold the turn signal/multifunction lever toward
you to use this feature. When this is done the following
will occur:
• If the headlamps are off, in low-beam or in Daytime
Running Lamps (DRL) mode, the high-beam
headlamps will turn on. They will stay on as long as
the lever is held there. Release the lever to turn
them off.
• For vehicles with High Intensity Discharge (HID)
headlamps, the low-beam headlamps must be
on to activate the high-beam headlamps. See High
Intensity Discharge (HID) Lighting on page 5-55.
• If the headlamps are already in high-beam mode,
they will remain on high-beam.
Windshield Wipers
The lever on the right side of the steering column
operates the windshield wipers.
7 (Mist): Pull the lever down and release it for a
single wiping cycle. The lever will return to its original
position. For more cycles, hold the lever down
before releasing it.
& (Delay): Move the lever to this position to set a
delay between wipes. Turn the delay adjustment band
to set the length of the delay.
6
(Delay Adjustment): Use this band to set the length
of the delay between wipes when using the delay
feature. The closer the band is moved towards
7 ,
the longer the delay. The windshield wiper lever must be
in delay for this feature to work.
3-9