CREATIVE PC-CAM 600 - Manual (Page 35)

Using PC-CAM 600 as a Digital Camera 23
a snapshot. The front red LED blinks once and the camera-ready green LED
blinks when the image is stored into memory, and turns off after the image is
saved.
❑ Single snapshot (normal resolution)
Select this mode if you want to take single snapshots at normal resolution.
Images are captured at a resolution of 1024 x 768.
Select the flash mode that you want and then press the Snapshot button to
take a snapshot. The front red LED blinks once and the camera-ready green
LED blinks when the image is stored into memory, and turns off after the
image is saved.
❑ Single snapshot (low resolution)
Select this mode if you want to take single snapshots at low resolution. Images
are captured at a resolution of 640 x 480.
Select the flash mode that you want and then press the Snapshot button to
take a snapshot. The front red LED blinks once and the camera-ready green
LED blinks when the image is stored into memory, and turns off after the
image is saved.
❑ Self-timer single snapshot (high resolution)
Select this mode if you want a high resolution snapshot to be taken after a
delay of ten seconds.
You can use this feature to take pictures of yourself.
Press the Snapshot button to take a delayed snapshot. The front LED light will
blink with increasing speed and then proceed to take a snapshot in the Single
snapshot mode.
The default delay time is ten seconds.
Note: You can cancel the snapshot while the camera is counting down by
pressing the Snapshot button again.