Cabletron Systems ELS10-26 - Manual (Page 64)

2-38
TCP/IP MIB-II
STATUS mandatory
2.16 TRAP DESCRIPTION
InterfacePortInsertion Not Supported.
Specific Trap Type Code - 0x1A0
This trap will be generated when it is detected that an interface
port has been inserted. The information will include:
ctIfNumber {ctIfEntry 1}
ctIfPortNumber {ctIfPortEntry 1}
ctPortType {ctIfPortEntry 3}
Specific Trap Type Code - 0x1A1
This trap will be generated when it is detected that an interface
port has been removed. The information will include:
ctIfNumber {ctIfEntry 1}
ctIfPortPortNumber {ctIfPortEntry 1}
InterfacePortLinkUp
Specific Trap Type Code - 0x1A2
This trap will be generated when it is determined that a port on a
strictly bridging interface (not “repeater”) has been connected to a
LAN. This is only appropriate for ports that support the concept of
a link state. The information will include:
ctIfNumber {ctIfEntry 1}
ctIfPortPortNumber {ctIfPortEntry 1}