Amico Emerald Series Recessed Console With Rail - Manual (Page 5)

5. Remove any devices that are blocking access to the fl ange crews.
Place everything in a safe and clean location.
6. Loosen the 2 fl ange screws and make necessary adjustments on
both sides.
7. Replace the devices removed in step 5.
8. Replace the aluminum device covers removed in step 4.
9. Mount the console box by using rivets or screws to attach the
fl anges (2 on each side) to the studs (See Fig. 1, NOTE 1). See
architectural drawings for mounting heights. Also coordinate
mounting heights with contractor on site.
www.amico.com 5