Amico Freedom Series Recessed - Manual (Page 3)

Installation
Preparation After Unit’s Arrival
1. Each panel wall will be delivered in multiple sections, see Figure 2 for reference. Review the approved project-
specific AS BUILT drawings for exact number of sections applicable to your installation. All panel wall sections and
panels are labeled with the room number and orientation within the frame for ease of installation.
2. Sections called “Drywall Mount” are installed on the finished wall, after walls are painted.
3. Sections called “Recessed Mount” are installed to the wall structure. Packaging/support material should be
removed carefully when unpacking.
4. Find the top and bottom spacer plates provided with the units and have them handy once you are ready to start
the installation. The spacer plates are labeled and must be used when installing the recessed sections. See Detail
A, B and C for overview and installation of the spacer plates.
5. Vertical rails, end caps, laminate strips and necessary hardware are packed separately to be installed after the
drywall installation. Please do not discard.
www.amico.com 3
Top Reveal
Middle Reveal
Bottom Reveal
Figure 2
Drywall mount
Recessed Mount
Recessed Mount
NOTE: Middle section will be
delivered in multiple pieces.