Amico Hydraulic Patient Transfer Stretcher (S-H-300) - Manual (Page 6)

Description of Features
Hi-lo Control
The hi-lo function foot pedals are on each side of the stretcher.
To raise the stretcher, press the Up control pedal and pump it until the
desired height is reached.
To lower the stretcher, press and hold the down control pedal until the
desired height is reached.
!
WARNING:
It is recommended that the stretcher be in the lowest position when the
patient is unattended. This may help reduce the severity of any injuries
resulting from patient falls.
!
CAUTION:
Use caution when lowering the stretcher. Make sure items in the storage
compartment do not interfere with the upper frame or siderail mounting
brackets otherwise equipment damage could occur.
Down/Trendelenburg/Reverse Trendelenburg
!
WARNING:
When changing the stretcher’s position, make sure hands, feet and equipment
are clear of the stretcher’s frame assemblies. Failure to do so could result in
injury or equipment damage.
The Trendelenburg/Reverse Trendelenburg function control pedals are on
each side of the stretcher.
To put the stretcher in the Trendelenburg position:
a. Put the stretcher in its raised position (see “Hi-lo” on page 10)
b. Press the Trendelenburg control pedal, and hold it until the desired
angle is reached.
To put the stretcher in the Reverse Trendelenburg position.
a. Put the stretcher in its raised position (see “Hi-lo” on page 10)
b. Press Reverse Trendelenburg control pedal, and hold it until the
desired angle is reached.
To level the sleep surface, do one of the following:
a. Press the down control pedal to lower the stretcher to its lowest
position. The sleep surface levels automatically.
b. If the stretcher is in the Trendelenburg position, press the Reverse
Trendelenburg control pedal until the stretcher is level.
c. If the stretcher is in the reverse Tredelenburg position, press the
Trendelenburg control pedal until the stretcher is level.
Description of Features
Fifth Wheel Capability
The fifth wheel improves straight line travel and controlled turning.
To engage the fifth wheel, press on the green side of the fifth wheel
pedal control. To deactivate the fifth wheel, press on the red side of
the pedal control.
10 Amico Beds www.amico.com 11