Amico Condor Adjustable Height Channel - Manual (Page 7)

www.amico.com 7
Installation, Tools and Part requirements
Tools required:
• Drill
• Drill bit size 9/64" (0.35 cm)
• Drill bit size ½"(1.27 cm)
• Philips screwdriver • Allen Key size 5/32" (0.39 cm)
• Allen Key Size 1/8" (0.31cm)
• ½" Socket Wrench (1.27 cm)
NOTE: Amico does not provide any monitor hardware, nor the tools necessary for assembly.
Hardware required:
• 2 X Mounting channel stopper with 10-32 screw, ½" (1.27 cm) (provided by Amico)
• Wall with studs/backing: 7 X Self drill screws, ¼-20, 3" (7.62 cm) (provided by Amico)
• Hollow wall: 7 X ¼ (0.635 cm)-20 x 2 ½” (6.35 cm) Flat head socket screws-fully threaded, 7 X Snap toggle wings
Other Items Provided by Amico:
• Condor Channel
• Accessories, mounting adapters, and arms if purchased through Amico Accessories Inc.
Pre-Installation Information (PLEASE READ CAREFULLY BEFORE STARTING)
WARNING IT IS DANGEROUS TO USE THE CONDOR FOR WEIGHTS OUTSIDE OF THE RATED RANGE. STRUCTURAL
FAILURE AND/OR SERIOUS INJURY COULD RESULT.
WARNING DO NOT POSITION THE CONDOR ABOVE A PATIENT.
The Condor contains a strong gas spring which is used to counter-balance the weight of the mounted device. The
Condor housing should never be disassembled by non-Amico personnel. Failure to follow these guidelines could result
in serious injury.
It shall be the responsibility of the hospital, its consultants and/or contractors to determine if the wall is adequate to
safely mount the specific instrument. This includes the selection of appropriate fasteners and the proper installation,
regardless of what is supplied with your Condor.
Verify the weight of the device to be mounted. (Condors are rated for a maximum of 40 lbs (18.1 kg) or 30 lbs (13.6 kg),
depending on the model you purchased). Check that the device to be mounted does not exceed the weight rating.
Serious injury and damage to the Condor can occur as a result of overloading arm assembly.
If you are unsure of your application, please contact an Amico Accessories product Specialist at 1-877-264-2697.
Considerable efforts have been made to ensure the safety of your hospital staff and your patients. The installation itself
is beyond the control of Amico Accessories Inc.. Accordingly, Amico Accessories Inc. will not be responsible for failure
related to the installation of the product.
CONTACT AMICO ACCESSORIES INC. TO DISCUSS SOLUTIONS NOT COVERED IN THIS MANUAL AT 1-877-264-2697
SECTION 2:
Installation Preparation