Amico Extended Latch-Valve Kit User Manual
Page 3
Advertising
Figure 1
Step 1: Preparation
*Measure wall depth from outlet rough-in to finished wall
surface (Figure 1)
* If wall depth is between 1-1/4” [31.75mm] and 1-3/4”
[44.45mm], the 3/8” [9.525mm] filler frame will be required
for proper installation.
* If wall depth is over 1-3/4” [44.45mm] discard the 3/8”
[9.525mm filler frame.
Assemble 3/8” Filler Frame and Trim Plate.
*Using the two #6-32 x 7/16”screws and the two #6-32 Keps
nuts provided, assemble the trim plate onto the Filler Frame.
(Figure 2, 3 & 4)
Figure 2
Figure 3
Figure 4
www.amico.com
3
Advertising