Can-Am DS250 - Manual (Page 91)

TRANSMISSION LEVER IS HARD TO MOVE (cont’d)
2. Engine idle speed is set too high.
– Adjust the idle speed. Refer to the SPECIFICATIONS.
3. CVT dirty or worn-out.
– Contact an authorized Can-Am dealer.
THE RPM INCREASES BUT THE VEHICLE DOES NOT MOVE
1. The transmission is in NEUTRAL position.
– Set transmission in REVERSE or FORWARD.
2. CVT dirty or worn-out.
– Contact an authorized Can-Am dealer.
3. Water in the CVT housing.
– Contact an authorized Can-Am dealer.
_____________________
89