Connecting your sata wire – Apricorn SATA Wire - USB 2.0 Interface to any 2.5" SATA Drive User Manual
Page 5
Advertising
5
www.apricorn.com
Device Installation
Installing your SATA Wire is easy. Simply connect your 2.5” SATA drive
to the SATA Wire and connect the SATA Wire to your computer (shown in
the figure below). Now you can upgrade your notebook drive using the
Upgrade Suite CD. Instructions for upgrading your Microsoft computer
are provided on the following pages. If you are upgrading your Mac,
please refer to page 27.
Connecting your SATA Wire
Advertising