B&G Zeus Touch 12 - Manual (Page 69)

68 |
StructureMap ™ | Zeus Touch Operator Manual
Recording StructureScan data
StructureScan data can be recorded from a chart panel with Structure overlay enabled.
StructureScan recordings can also be started from a StructureScan panel. Refer to the
Operation manual for more details.
When StructureScan data is being recorded, there
will be a flashing red symbol and a message will
appear periodically at the bottom of the screen.
¼ Note: The message includes information about
file size. Keep the size of your sonar logs to 100MB or
less to allow for faster file conversion.
The sounder recording is stopped by re-selecting
the record function.
Converting StructureScan data to StructureMap format
A StructureScan log file is converted to StructureMap format after recording from the
recording dialog as shown page 67, or from the Files dialog.
After conversion the StructureMap (*.smf ) file will be saved to the same location as the
StructureScan file. To save disc space it is recommended to remove the StructureScan (*.sl2)
files after conversion.
Using StructureMap with mapping cards
StructureMap allows you to maintain full chart capability and can be used with embedded
cartography as well as Navionics, Insight and other third-party charting cards compatible with
our systems.
When using StructureMap with mapping cards, copy the StructureMap (.smf ) files to the units
internal memory. We recommend keeping copies of StructureMap files on external Micro-SD
cards.