B&G V90 VHF Radio - Manual (Page 13)

| 13
Preparation | V90 Installation Manual
• Cable ties x 10
• Spare 10 A fuse
• Transceiver fasteners:
• M3.5 x 23 mm selftapping screw x4
• M3.5 x 28 mm machine screw x4
• M3.5 hex nut x4
• Flat washer x4
External speaker unit
• External speaker (with 5m cable)
• Foam gasket (for flush mounting)
• Plastic speaker surface mount box
• Speaker fasteners:
• M3 x 40 mm selftapping screw x4
• M3 x 10 mm selftapping screw x4
• M3 x 10 mm machine screw x4
• M3 x 40 mm machine screw x4
• M3 nut x8
• Spring washer x8
• Flat washer x8
Documentation
• Operating Manual 988-10723-001
• Installation Manual 988-10728-001 (this document)
• Warranty Card
• DSC Warning Label
• Declaration of Conformity document (where applicable)
¼ Note: A VHF antenna is not provided by B&G. An antenna with
a PL259 plug is required. Consult your B&G dealer for advice if
required.