B&G NSPL-400 - Manual (Page 14)

| 13
Installation | NSPL-400 User Manual
Step 3 - Connecting the VHF radio
Using the VHF radio accessory cable provided with this product,
route the cable from the VHF radio to the NSPL-400 and connect to
the VHF radio connector on the NSPL-400 as shown in Figure 7. If
the cable supplied is not long enough please contact your dealer
for details of suitable extension cables.
A standard marine band VHF voice radio should be used with the
NSPL-400. The antenna splitter is DSC compatible.
Fig. 7 Location - VHF radio
AIS transceiver VHF antenna
VHF radio VHF radio
AIS transceiver VHF antenna
Figure 7 Position of the VHF radio connector