B&G H1000 Analogue - Manual (Page 6)

system connections
connections
System components share data together via a common Fastnet 2
databus and are supplied with bayonet connectors for ease of
installation. A selection of cable lengths are available with options for
straight and right angle connectors to suit most requirements.
To prevent the occurrence of voltage drops on larger systems, the
power supply to the system should either be placed mid-way or at
both ends of the Fastnet
2 databus. To connect power to the mid-point
of the system, it is recommended that the 4-Way Hub be used. The 4-
Way Hub offers two advantages. The first advantage is that it offers a
convenient entry point for power onto the system. The second
advantage is that it conveniently allows the system to be branched to
reduce the overall length of the system. The correct selection of
Fastnet
2 cable will negate the need for any plugs to be removed from
the system and ensure years of faultless operation.
12 V power cable
“HUB”
Bus cable
Bus cable Bus cable