B&G Network Pilot (ACP) - Manual (Page 13)

1 - 12
MAN OVERBOARD BUTTON (MOB)
DESCRIPTION
The man overboard alarm button (MOB) is a large red waterproof switch
with 15 metres/45ft of two-core screened cable. This button starts the
MOB sequence of operations when pressed and the audible alarm
sounds (if fitted).
SITING THE MAN OVERBOARD ALARM BUTTON
• Select a suitable bulkhead, easily accessible in an emergency.
MOUNTING PROCEDURE
• With a 32mm (1 1/4") hole-cutter cut a clearance hole for the button
body.
• Remove the nut and washer, then ensuring the sealing gasket is in
place to prevent leakage, carefully feed the cable through the hole.
• From behind the bulkhead, fit the washer and nut and tighten.