Baseline Systems FlowStation User Manual
Flowstation quick start guide
Advertising
Table of contents
Document Outline
- Introduction
- FlowStation Front Panel Layout
- Controller Status Report
- Overview of FlowStation and Shared Flow Setup
- Quick Start for the FlowStation and Shared Flow Group
- STEP 1 – Install the FlowStation
- STEP 2 – Power Up the Communication Module in the FlowStation
- STEP 3 – Configure the Network Settings on the FlowStation
- STEP 4 – Install the BaseStation 3200 Controllers
- STEP 5 – Install and Connect All Devices
- STEP 6 – Complete the BaseStation 3200 Configuration
- STEP 7 – Power Up the Communication Modules in the BaseStation 3200s
- STEP 8 – Configure the Network Settings on the BaseStation 3200s
- STEP 9 – Connect the BaseStation 3200s to the FlowStation
- STEP 10 – Check the BaseStation-FlowStation Connection Status
- STEP 11 – Turn Over Control of the POCs to the FlowStation
- STEP 12 – Assign the Programs to the FlowStation
- STEP 13 – Configure the FlowStation Settings