BE Pressure supply 2" Fire Fighting Cart HPFC-2070R User Manual
Page 17
17
Starting the Water Pump
Use the following start instructions:
1. Make sure unit is on a flat, level surface and pump chamber is primed.
2. Turn fuel valve (1) to “On” position. The fuel valve handle will be
vertical (pointing toward the ground).
3. Push on/off switch (2) to “On” position.
4. Move engine speed lever (3) to “Fast” ( ) position.
6. Grasp recoil handle and pull slowly until slight resistance is felt. Then
pull handle rapidly to overcome compression, prevent kickback and
start engine.
5. Move choke lever (4) to “On” position.
starting
the
water
pump
2
3
4
WARNING
Starter cord kickback (rapid retraction) can result in
bodily injury. Kickback will pull hand and arm toward
engine faster than you can let go.
Broken bones, fractures, bruises, or sprains could
result.
• When starting engine, pull cord slowly until resistance is felt and then
pull rapidly to avoid kickback.
1