Bio-Rad Trans-Blot® SD Semi-Dry Transfer Cell - Manual (Page 3)

Note
To insure best results from the Trans-Blot SD DNA/RNA Blotting Kit, become fully acquainted
with its instructions before using the kit. It is also recommended that you follow the protocol as
closely as possible in order to achieve optimum results.
Bio-Rad recommends that the kit component (gel support frame) be cleaned with a mild, labora-
tory cleaner (such as Bio-Rad Cleaning Concentrate, catalog number 161-0722) and rinsed thor-
oughly with distilled water, before use.
Warranty
Bio-Rad Laboratories warrants the gel support frame against defects in materials and workman-
ship for 1 year. If any defects should occur with the frame during the warranty period, Bio-Rad
Laboratories will replace the part free of charge. The following defects, however, are specifically
excluded:
1. Defects caused by improper operation.
2. Damage caused by accident or misuse.
3. Damage caused by disaster.
4. Corrosion due to use of improper solvent or sample.
For an inquiry, contact Bio-Rad Laboratories in the U.S at 1-800-4-BIORAD, outside the U.S.
contact your local Bio-Rad office.
Catalog No.
Date of Delivery
Invoice No.
Purchase Order No.