Bio-Rad Immun-Blot® PVDF Membrane - Manual (Page 8)

Section 7
Product Information
Catalog
Number
Product Description
Immun-Blot PVDF Membrane
162-0174 7 x 8.4 cm, 10 sheets
162-0175 10 x 15 cm, 10 sheets
162-0176 20 x 20 cm, 10 sheets
162-0177 26 cm x 3.3 m, 1 roll
Blotting Equipment
170-3910 Trans-Blot Electrophoretic
Transfer Cell
170-3946 Trans-Blot Cell with Plate
Electrodes
170-3930 Mini Trans-Blot ® Cell
170-3940 Trans-Blot SD Semi-Dry
Transfer Cell
11
Note: The membrane can be stored after proteins have
been transferred, but prior to immunoblotting. Store it
dry and rewet it when needed. To dry the membrane,
place it on filter paper and let it dry at room temperature
for a few hours. When you are ready to analyze the blot-
ted samples, rewet the membrane by placing it in 100%
methanol or into a staining solution that contains at least
50% MeOH.
In the U.S., technical service is available by
calling 1-800-4BIORAD (1-800-424-6723).
Our Technical Service representatives are
available to answer your questions from 8 AM
to 5 PM (PST).
Section 6
References
1. Towbin, H., Staehelin, T. and Gordon, J., Proc.
Natl. Acad. Sci. USA, 76, 4350-4354 (1979).
10
4006127.qxd 6/23/98 8:48 AM Page 10