Using a memory card, To replace the memory card – Casio EXILIM EX-ZS100 User Manual

Page 121

Advertising
background image

121

Appendix

See page 22 for information about supported memory cards and how to load a
memory card.

Press the memory card and then release it. This
will cause it to pop out of the memory card slot
slightly. Pull the card out the rest of the way and
then insert another one.

• Never remove a card from the camera while

the back lamp is flashing green. Doing so can
cause the image save operation to fail and
even damage the memory card.

.

Using a Memory Card

• SD memory cards, SDHC memory cards, and SDXC

memory cards have a write protect switch. Use the
switch when you need to guard against accidentally
deleting data. Note, however, if you write protect an SD
memory card you must then turn write protection off
whenever you want to record to it, format it, or delete
any of its images.

• If a memory card starts to behave abnormally during image playback, you can

restore normal operation by reformatting it (page 111). However, it is
recommended that you always take along multiple memory cards whenever using
the camera far away from the home or office.

• As you record data to and delete data from a memory card a number of times, it

loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.

• Electrostatic charge, electrical noise, and other phenomena can cause data to

become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).

Using a Memory Card

To replace the memory card

Write enabled

Write disabled

Advertising