Craftsman TRACTOR LIFT 610.246 - Manual (Page 6)

4
22
24
23
25
1
23
25
24
29
Note: The higher the lift tube extensions (5)
are positioned, the harder the tractor will be to lift.
5
A B C D D C B A
Push mower
Brush guard bumper
(can also be used for
front of Craftsman tractor)
Front of Craftsman Zero Turn
Front of Craftsman Tractors
Settings:
A. Push Mower
B. Brush guard / Bumper installed
C. Front of Craftsman Tractor
D. Front of Craftsman Zero Turn
Lift tubes come pre-assembled. Attach lift tube assemblies ( 4 ) to angle frame ( 1 ) using bolts ( 22 ), flat washers ( 24 ), split lock washers ( 23 ) •
and hex nuts ( 25 ).
Secure rear of lift tube assembly ( 4 ) to angle frame ( 1 ) using bolts ( 29 ), flat washers ( 24 ), split lock washers ( 23 ) and hex •
nuts ( 25 ).
Note: Over-tightening receiver bolts ( 22 ) could cause damage to lift tubes ( 4 ).
Determining the width between lift tubes.
Assemble Tractor Lift
Attach Lift Tubes to Angle Frame
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 6.